PORTAGAUGE II
Low cost material thickness gauge

APPLICATIONS

Suitable for measuring thickness and corrosion of ships hulls and bulk heads, fire cylinders, pressure vessels, chemical equipment, boilers, oil storage tanks and industrial pipework etc.

MATERIALS MEASURED

Any hard materials, including Steel, Cast Iron, Aluminium, Copper, Brass, Zinc, Quartz, Glass, Polyethylene, PVC, Grey Cast Iron, Stainless steel etc.

Supplied complete with 10mm transducer, ultrasonic couplant, Calibration block, Instruction, Manual, Carrying Case.

• Measuring Range 1.2 – 225 mm (0.05 - 9 inches)
• Accuracy levels +/- 0.5% or 0.1mm
• Sound Velocity 500 – 9000 m/s
• Lower limit steel pipes 15 x 2.0mm, 20 x 3.0mm determined by the transducer
• Resolution 0.1mm
• Power Supply 4 x 1.5V AAA (UM-4)
• Operating Conditions 0-40ºC/10- 90% RH
• Dimensions 120 x 62 x 30mm, Weight 164g

OPTIONAL ACCESSORIES

• 6mm Thin material probe. Measuring range (steel) 1.0 – 50.0mm. Operating temp: -10 - +60ºC
• 12mm High Temperature Probe. Measuring Range (steel) 4.0 – 100mm. Operating Temp: -10 - +300ºC
• Cable and Software for RS232C Interface

MULTIGAUGE 5500

APPLICATIONS

The Multigauge 5500 has been designed for hands free use when climbing on staging, scaffolding, ladders or when accessing by rope. Whether it’s onboard a ship, on large storage tanks, climbing on top of a road tanker or ultrasonic inspection underneath a bridge, the 5500 will measure thickness with ease.

TECHNICAL SPECIFICATION

• Sound Velocity Range: From 1000 m/s to 8000 m/s (0.0394 in/µs to 0.3150 in/µs)
• Probes: Single crystal soft faced - 2.25 MHz, 3.5 MHz & 5 MHz
• Measurement Range: 1 - 250 mm (0.04" - 10") depending on probe used
• Probe Sizes: 6 mm (0.25"), 13 mm (0.5”) & 19 mm (0.75")
• Resolution: 0.1 mm (0.005") or 0.05 mm (0.002")
• Accuracy: ± 0.1 mm (0.005") or ± 0.05 mm (0.002")
• Display: Red 4 character 7 segment LED
• Batteries: 3 x disposable AA alkaline batteries or rechargeable NiMH / NiCD
• Battery Life: 20 Hours continuous use using alkaline batteries
• Gauge Dimensions: 147 mm x 90 mm x 28 mm (5.75" X 3.5" X 1")
• Gauge Weight: 320 g (11.3 ounces) including batteries
• Environmental: Case rated to IP65, RoHS and WEEE compliant
• Operating Temp.: -10°C to +50°C (14°F to 122°F)
• Storage Temp.: -10°C to +60°C (14°F to 140°F)

MULTIGAUGE 5600

APPLICATIONS

The Multigauge 5600 is a simple, robust ultrasonic thickness gauge designed for most common thickness gauging applications. The easy to use keypad allows operator interface whilst the bright LCD display can be used in all light conditions. The moulded soft rubber surround feels comfortable, looks good and provides extra protection against knocks and scrapes.

TECHNICAL SPECIFICATION

• Sound Velocity Range: From 1000 m/s to 8000 m/s (0.0394 in/µs to 0.3150 in/µs)
• Probes: Single crystal soft faced - 2.25 MHz, 3.5 MHz & 5 MHz
• Measurement Range: 1 - 250 mm (0.04" - 10") depending on probe used
• Probe Sizes: 6 mm (0.25"), 13 mm (0.5”) & 19 mm (0.75")
• Resolution: 0.1 mm (0.005") or 0.05 mm (0.002")
• Accuracy: ± 0.1 mm (0.005") or ± 0.05 mm (0.002")
• Display: Multi character LCD with white back light
• Batteries: 3 x disposable AA alkaline batteries or rechargeable NiMH / NiCD
• Battery Life: 20 Hours continuous use using alkaline batteries
• Gauge Dimensions: 147 mm x 90 mm x 28 mm (5.75" X 3.5" X 1")
• Gauge Weight: 330 g (11.6 ounces) including batteries
• Environmental: Case rated to IP65, RoHS and WEEE compliant
• Operating Temp.: -10°C to +50°C (14°F to 122°F)
• Storage Temp.: -10°C to +60°C (14°F to 140°F)

MULTIGAUGE 3000
Underwater Gauge

The Multigauge 3000 Underwater Gauge is a simple, robust ultrasonic thickness gauge designed for most common underwater thickness gauging applications. The gauge is pressure tested to 500m and has the option to transfer measurements to a surface display unit with the simple addition of a replacement end cap. It has been designed and built to survive extremely harsh conditions that exist in the offshore and underwater industries worldwide. The gauge uses multiple echo which means measurements can be easily taken without the need to remove coatings and the large bright LED display ensures the display can be seen by the diver, even in poor visibility.

The gauge is equipped with IPR (intelligent Probe Recognition), which automatically adjusts settings in the gauge for enhanced performance and (Automatic Measurement Verification System) to ensure only true measurements are displayed, even on the most heavily corroded metals.

FEATURES

• Ignores coatings using multiple echo
• Pressure tested to 500m
• Bright clear LED display
• Easy to use
• No fuss upgrade option to a topside repeater
• Rugged and robust
• Intelligent probe recognition (IPR)
• Automatic measurement verification (AMVS)
• No zeroing required

ACCEPTED BY DET NORSKE VERITAS

Please contact the office directly with your requirements

	Descrizioni tecniche ed Istruzioni operative, sono disponibili anche in Italiano. Per la richiesta delle copie, Vi preghiamo di contattare l'Ufficio Vendite.
	Podemos facilitar en español la información técnica y las instrucciones de operación. Envíen un e-mail a nuestra oficina de ventas solicitando las copias que necesiten.
	Produktinformation und Gebrauchsanweisung auf Deutsch erhältlich. Für weitere Informationen wenden Sie sich bitte in Englisch oder Deutsch an unser Kundenservice.